You are having a best Keurig coffee maker and you are satisfied what it has gien ot you so far, but recently, you find some clogging with it? You are managing to fix it but the result seems unchanged. So it’s take you inter to our proven secrets to fix a clogged Keurig.
Yes, here are some proven tips to deal with a clogged Keurig.
- First of all, insert the current needle into the K-Cup container. Elevate the cup container handle while gripping the container with one hand. Push up from the underneath of the cup container to release it, using the other hand. The small, pointed current needle is on the right inside the K-Cup container.
- Set the outside loop of a paper clip straight, leaving the inside loop intact so that you can grab it as a handle.
- Locate the straighten end of the paper clip through the underneath of the current needle. Scratch the sides of the needle with the paper clip with the purpose of loosening debris like coffee grinds. Don’t try to push the paper clip all the way through the exit needle. The exit is on the side of the needle, not the top as many users often think.
- Wipe out the cup container with cool water to remove any remaining debris.
- Reinstall the cup container by aligning the tabs on the holder, using the Keurig machine and pushing down lightly to break the holder into place.
- Clean your single cup coffee maker to remove mineral deposits in case the clog doesn’t exist in the current needle. Fill the water container with 10 ounces of white vinegar while putting a ceramic mug beneath the beverage dispenser.
- Elevate the machine handle as if you did while inserting a K-Cup, but do not insert any K-Cup in the area. Then, after almost five seconds, lower the handle.
- Press the “starting” button and wait until the cycle completes. Throw the hot vinegar in a sink.
- Repeat the procedure through pressing brew button. Wait until the brew button turns from flashing red into solid red, then turn the Keurig off. Keep vinegar sit within the device for 30 minutes.
- Turn on the Keurig, lift and lower the brewer handle and press the brew button. Wait for the cycle to finish and throw the vinegar.
- Run 10 ounces of water through the Keurig three times before using a K-Cup. The water should be fresh water, which will help to clear the vinegar residue and taste from the machine.
- Make sure that the Keurig is blank of water and the auto-off feature is off.
- Add 48 ounces of white vinegar into the water container and locate a large ceramic mug below the dispenser. Do not add any K-Cup. Press the brew button and let the cycle complete.
- Contiue the steps you find the “add water” indicator is on. Keep the vinegar in to the Keurig for four hours. Do not turn it off.
- Remove any remaining vinegar and clean the water container. Don’t let the machine get wet.
- Fill the water container with water, place a large mug under the dispenser and press brew. Discard the used water into the sink and do the steps again until you find the “add water” indicator light up.
Ok, here are details steps on how to completely How to Fix a Clogged Keurig. They are all simple and easy to follow. So if you are experiencing clogged problems, follow them for problem solving and finally have your machine work at its best.